Connects up to 4 cameras of Cx and Gx series and up to two other devices using COM (RS-232C) interface to the computer over the Ethernet network through TCP/IP protocol. Supports connection of Cx cameras by USB 3.0.

Connects up to 4 cameras of Cx and Gx series to the computer over the Ethernet interface through TCP/IP protocols. Does not support connection of Cx cameras by USB 3.0., only by USB 2.0.

USB/WiFi interface ASUS USB-N10; intended for all types of Moravian Camera ETH Adapter

Intended for filters in standard 1.25" threaded cells or glass-only filters up to 31.5mm. Filter wheel diameter is 95.5 mm.

Intended for glass-only filters up to 26.4mm. Filter wheel diameter is 95.5 mm.

Intended for filters in standard 2" threaded cells or 50mm glass-only filters. Filter wheel diameter is 145 mm.

Intended for 7 D36 mm filters without cells. Can be used with C3 camera equipped with APS size sensors only. Cameras with “Full-frame” sensors (24 × 36mm) cannot use such small filters. Filter wheel diameter is 145 mm.

Intended for D36mm filters without cells. Filter wheel diameter is 144 mm.

Intended for filters in standard 1.25" threaded cells or 31mm glass-only filters. Filter wheel diameter is 144 mm.

Intended for filters in standard 2" threaded cells or 50mm glass-only filters. Filter wheel diameter is 184 mm.

Intended for D36mm filters without cells. Filter wheel diameter is 184 mm.

Intended for filters in standard 1.25" threaded cells or 31mm glass-only filters. Filter wheel diameter is 184 mm.

Intended for square 50x50mm filters. Filter wheel diameter is 190 mm.

Intended for filters in standard 2" threaded cells or 50mm glass-only filters. Filter wheel diameter is 190 mm.

Intended for square 50x50mm filters. Filter wheel diameter is 226 mm.

Intended for filters in standard 2" threaded cells or 50mm glass-only filters. Filter wheel diameter is 226 mm.

Intended for square 65x65mm filters. Filter wheel diameter is 240 mm.

Intended for square 50x50mm filters. Filter wheel diameter is 240 mm.

Inteded for C3/C4 cameras with enhanced cooling, for C1x and C5 cameras

Inteded for C3/C4 cameras with enhanced cooling, for C1x and C5 cameras

Requires the camera front shell with stative mounts. Not compatible with OAG.

Necessary for 1.75" dovetail adapter (Vixen standard). Please mention the S/N of your camera when ordering. Compatible only with revision 2 cameras.

Standard 1.25 inch telescope focuser adapter with C-thread

Inteded for internal and external filter wheels with 1.25 "thread

Standard CS-mount (12.5 mm BFD) to 1.25'' adapter

Standard autoguider cable with two 6-pin RJ-12 connectors

Standard autoguider cable with two 6-pin RJ-12 connectors

Standard autoguider cable with two 6-pin RJ-12 connectors

For C2, C3, C4 series cameras AC/12VDC, 5A, 60W

For C5 series cameras AC/12VDC 10A 4pin mini DIN

For C5 series cameras AC/12VDC 12,5A 4pin mini DIN

Extension cable SMA(m) - SMA(f), for cameras with GPS module.

Extension cable SMA(m) - SMA(f), for cameras with GPS module.

Extension for power supply of C2/G2, C3/G3 and C4/G4 cameras

Extension for power supply of C2/G2, C3/G3 and C4/G4 cameras

Extension for power supply of C2/G2, C3/G3 and C4/G4 cameras

Extension for power supply of C5 cameras

Intended for C5 cameras with EFW, cable with two 8-pin RJ45 connectors, length 0,45 m

Inteded for cameras without filter wheel or with internal filter wheel

Inteded for cameras with external filter wheel

Inteded for C2, G2, G3 and G4 cameras

Silikon o-ring for C2/G2 internal filter wheel

Silicone o-ring for EFW-XS and for C3/G3 internal filter wheel

Inteded for cameras with "XS" size external filter wheel

Inteded for cameras with "S" and "M" size external filter wheel

Inteded for cameras with "L" size external filter wheel

Inteded for C2 CMOS cameras

Inteded for G2 cameras

Inteded for C3/C4 CMOS cameras with standard cooling

Inteded for G3/G4 cameras with standard cooling

Inteded for C3/C4 CMOS cameras with enhanced cooling

Inteded for G3/G4 cameras with enhanced cooling